Skip to main content
Version: v2.9.x LTS

Starting and stopping Zowe

Last updated
:  |
... min read
|
Edit this page
PDF
Open doc issue

Starting and stopping Zowe

Zowe consists 3 main started tasks:

  • ZWESLSTC as Zowe main started task,
  • ZWESISTC as Zowe cross memory server
  • and ZWESASTC as Zowe cross memory auxiliary server.

Starting and stopping the cross memory server ZWESISTC on z/OS​

The cross memory server is run as a started task from the JCL in the PROCLIB member ZWESISTC. It supports reusable address spaces and can be started through SDSF with the operator start command with the REUSASID=YES keyword:

/S ZWESISTC,REUSASID=YES

The ZWESISTC task starts and stops the ZWESASTC task as needed. Do not start the ZWESASTC task manually.

To end the Zowe cross memory server process, issue the operator stop command through SDSF:

/P ZWESISTC

Note:

The starting and stopping of the ZWESLSTC started task for the main Zowe servers is independent of the ZWESISTC cross memory server, which is an angel process. If you are running more than one ZWESLSTC instance on the same LPAR, then these will be sharing the same ZWESISTC cross memory server. Stopping ZWESISTC will affect the behavior of all Zowe servers on the same LPAR that use the same cross-memory server name, for example ZWESIS_STD. The Zowe Cross Memory Server is designed to be a long-lived address space. There is no requirement to recycle regularly. When the cross-memory server is started with a new version of its load module, it abandons its current load module instance in LPA and loads the updated version.

Starting and stopping the cross memory auxiliary server ZWESASTC on z/OS​

This is handled automatically by Zowe cross memory server. You don't need to manually start or stop this started task.

Starting and stopping Zowe main server ZWESLSTC on z/OS with zwe server command​

Zowe ships zwe start and zwe stop commands to help you start and stop Zowe main server.

To start Zowe, run zwe start --config /path/to/my/zowe.yaml command. It will issue S command to Zowe ZWESLSTC.

Here is an example:

#>zwe start --config /path/to/my/zowe.yaml
===============================================================================
>> STARTING ZOWE

-------------------------------------------------------------------------------
>> Job ZWE1SV is started successfully.

#>

Job name ZWE1SV can be customized with zowe.job.name in your Zowe configuration file.

You can use zwe start command to start a Zowe high availability instance defined on other LPAR within the Sysplex. For example, zwe start --config /path/to/my/zowe.yaml --ha-instance hainst2. This requires these information be defined in Zowe configuration file:

haInstances:
  hainst2:
    hostname: lpar2-domain.com
    sysname: LPAR2

zwe start command will use ROUTE command to send S ZWESLSTC command to LPAR2 system.

To stop Zowe, run zwe stop --config /path/to/my/zowe.yaml command. It will issue P command to Zowe job.

Here is an example:

#>zwe stop --config /path/to/my/zowe.yaml
===============================================================================
>> STOPPING ZOWE

-------------------------------------------------------------------------------
>> Job ZWE1SV is stopped successfully.

#>

Starting and stopping Zowe main server ZWESLSTC on z/OS manually​

To start Zowe main server, you can issue S ZWESLSTC command. Same as normal JES S command, you can customize JOBNAME. For example, S ZWESLSTC,JOBNAME=ZWE1SV.

If you have Zowe high availability instance defined and want to start a specific HA instance, for example myinst1, you can pass with HAINST parameter. Here is an example: S ZWESLSTC,HAINST=myinst1,JOBNAME=ZWE1SV1. Zowe high availability instance name is case insensitive. HAINST=myinst1 and HAINST=MYINST1 are same.

If you are starting Zowe high availability instance for another LPAR in the Sysplex, you can use ROUTE command to route the S command to the target system. For example, I'm working on SYSNAME LPAR1 and want to start HA instance myinst2 on LPAR2, you can issue RO LPAR2,S ZWESLSTC,HAINST=myinst2,JOBNAME=ZWE1SV2.

To stop Zowe main server, you can issue P <jobname> command.

caution

With Zowe version 1, you can issue C command to stop Zowe main server. This is not supported in version 2 anymore. A P command is required to make sure Zowe components can be shuted down properly.

Stopping and starting a Zowe component without restarting Zowe main server​

You can restart a Zowe component with JES modify command without restarting the whole Zowe main server. You need to know these information before issuing the modify command:

  • Your Zowe main server job name. By default, it is configured as ZWE1SV. You can find your customized value by checking zowe.job.name defined in Zowe configuration file.
  • The component name you want to stop or start. You can find a full list of installed components by listing <RUNTIME>/components directory and Zowe extension directory.

To stop a running Zowe component, issue F <zowe-job>,APPL=STOP(<component-name>) command. For example, if you want to stop app-server, issue F ZWE1SV,APPL=STOP(app-server).

To start a stopped Zowe component, issue F <zowe-job>,APPL=START(<component-name>) command. For example, if you want to start app-server, issue F ZWE1SV,APPL=START(app-server).

Note, please be aware that not all components can be restarted with this method. Some components may rely on another and you may need to restart affected components as well.

On this page