Advanced Gateway features configuration

As a system programmer who wants to configure advanced Gateway features of the API Mediation Layer, you can customize Gateway parameters by modifying either of the following files:

• <Zowe runtime directory>/components/gateway/bin/start-gateway.sh
• <Zowe runtime directory>/components/gateway/manifest.yaml
• zowe.yaml

The parameters begin with the -D prefix, similar to all the other parameters in the file.

Note: Restart Zowe to apply changes to the parameter.

Follow the procedures in the following sections to customize Gateway parameters according to your preferences:

• Prefer IP Address for API Layer services
• SAF as an Authentication provider
• Enable JWT token refresh endpoint
• Change password with SAF provider
• Gateway retry policy
• Gateway client certificate authentication
• Gateway timeouts
• CORS handling
• Encoded slashes
• Add a custom HTTP Auth header to store Zowe JWT token
• Add custom HTTP Auth headers to store user ID and PassTicket
• Connection limits
• Routed instance header
• Distributed load balancer cache
• Replace or remove catalog with another service
• Personal Access Token
• API Mediation Layer as a standalone component
• SAF resource checking

SAF as an Authentication provider

By default, the API Gateway uses z/OSMF as an authentication provider. It is possible to switch to SAF as the authentication provider instead of z/OSMF. The intended usage of SAF as an authentication provider is for systems without z/OSMF. If SAF is used and the z/OSMF is available on the system, the created tokens are not accepted by z/OSMF. Use the following procedure to switch to SAF.

Follow these steps:

1. Open the zowe.yaml configuration file.
2. Find or add the property components.gateway.apiml.security.auth.provider and set the value to saf.
3. Restart Zowe&trade.

Authentication requests now utilize SAF as the authentication provider. API ML can run without z/OSMF present on the system.

Enable JWT token refresh endpoint

Enable the /gateway/api/v1/auth/refresh endpoint to exchange a valid JWT token for a new token with a new expiration date. Call the endpoint with a valid JWT token and trusted client certificate. In case of z/OSMF authentication provider, enable API Mediation Layer for passticket generation and configure z/OSMF APPLID. Configure Passtickets

Follow these steps:

1. Open the file zowe.yaml.

2. Configure the following properties:

   • components.gateway.apiml.security.allowtokenrefresh: true

     Add this property to enable the refresh endpoint.

   • components.gateway.apiml.security.zosmf.applid

     If you use z/OSMF as an authentication provider, provide a valid APPLID. The API ML generates a passticket for the specified APPLID and subsequently uses this passticket to authenticate to z/OSMF. The default value in the installation of z/OSMF is IZUDFLT.

3. Restart Zowe.

Change password with SAF provider

Update the user password using the SAF Authentication provider. To use this functionality, add the parameter newPassword on the login endpoint /gateway/api/v1/auth/login. The Gateway service returns a valid JWT with the response code 204 as a result of successful password change. The user is then authenticated and can consume APIs through the Gateway. If it is not possible to change the password for any reason, the response code is 401.

This feature is also available in the API Catalog.

Use a POST REST call against the URL /gateway/api/v1/auth/login:

{
"username" : "<username>",
"password" : "<password>",
"newPassword" : "<newPassword>"
}

Note: It is a common practice to set the limit for changing the password in the ESM. This value is set by the parameter MINCHANGE for PASSWORD. The password can be changed once. Subsequently, it is necessary to wait the specified time period before changing the password again.

Example:

MINCHANGE=120

where:

• 120

  Specifies the number of days before the password can be reset

Change password with z/OSMF provider

Update the user password using the z/OSMF Authentication provider. To use this functionality, add the parameter newPassword on the login endpoint /gateway/api/v1/auth/login. The Gateway service returns a valid JWT with the response code 204 as a result of successful password change. The user is then authenticated and can consume APIs through the Gateway. If it is not possible to change the password for any reason, the response code is 401.

This feature is also available in the API Catalog.

Use a POST REST call against the URL /gateway/api/v1/auth/login:

{
"username" : "<username>",
"password" : "<password>",
"newPassword" : "<newPassword>"
}

Note: In order to use the password change functionality via z/OSMF, it is necessary to install the PTF for APAR PH34912.

Gateway retry policy

To change the Gateway retry policy, edit properties in the <Zowe install directory>/components/gateway/bin/start.sh file:

All requests are disabled as the default configuration for retry with one exception: the server retries GET requests that finish with status code 503. To change this default configuration, include the following parameters:

• ribbon.retryableStatusCodes

  Provides a list of status codes, for which the server should retry the request.

  Example: -Dribbon.retryableStatusCodes="503, 404"

• ribbon.OkToRetryOnAllOperations

  Specifies whether to retry all operations for this service. The default value is false. In this case, only GET requests are retried if they return a response code that is listed in ribbon.retryableStatusCodes. Setting this parameter to true enables retry requests for all methods which return a response code listed in ribbon.retryableStatusCodes.

  Note: Enabling retry can impact server resources due to request body buffering.

• ribbon.MaxAutoRetries

  Specifies the number of times a failed request is retried on the same server. This number is multiplied with ribbon.MaxAutoRetriesNextServer. The default value is 0.

• ribbon.MaxAutoRetriesNextServer

  Specifies the number of additional servers that attempt to make the request. This number excludes the first server. The default value is 5.

Gateway client certificate authentication

Use the following procedure to enable the feature to use a client certificate as the method of authentication for the API Mediation Layer Gateway.

Follow these steps:

1. Open the zowe.yaml configuration file.

2. Configure the following properties:

   • components.gateway.apiml.security.x509.enabled

     This property is the global feature toggle. Set the value to true to enable client certificate functionality.

   • components.gateway.apiml.security.zosmf.applid

     When z/OSMF is used as an authentication provider, provide a valid APPLID to allow for client certificate authentication. The API ML generates a passticket for the specified APPLID and subsequently uses this passticket to authenticate to z/OSMF. The default value in the installation of z/OSMF is IZUDFLT.

     Note: The following steps are only required if the ZSS hostname or default Zowe user name are altered:

3. Change the following property if user mapping is provided by an external API:

   • components.gateway.apiml.security.x509.externalMapperUrl

   Note: Skip this step if user mapping is not provided by an external API.

   The API Mediation Gateway uses an external API to map a certificate to the owner in SAF. This property informs the Gateway about the location of this API. ZSS is the default API provider in Zowe. You can provide your own API to perform the mapping. In this case, it is necessary to customize this value.

   The following URL is the default value for Zowe and ZSS:

   https://${ZWE_haInstance_hostname}:${GATEWAY_PORT}/zss/api/v1/certificate/x509/map

4. Add the following property if the Zowe runtime userId is altered from the default ZWESVUSR:

   • components.gateway.apiml.security.x509.externalMapperUser

   Note: Skip this step if the Zowe runtime userId is not altered from the default ZWESVUSR.

   To authenticate to the mapping API, a JWT is sent with the request. The token represents the user that is configured with this property. The user authorization is required to use the IRR.RUSERMAP resource within the FACILITY class. The default value is ZWESVUSR. Permissions are set up during installation with the ZWESECUR JCL or workflow.

   If you customized the ZWESECUR JCL or workflow (the customization of zowe runtime user: // SET ZOWEUSER=ZWESVUSR * userid for Zowe started task) and changed the default USERID, create the components.gateway.apiml.security.x509.externalMapperUser property and set the value by adding a new line as in the following example:

   Example:

   components.gateway.apiml.security.x509.externalMapperUser: yournewuserid  

5. Restart Zowe&trade.

Gateway timeouts

Use the following procedure to change the global timeout value for the API Mediation Layer instance.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.gateway.timeoutmillis, and set the value to the desired value.
3. Restart Zowe&trade.

If you require finer control, you can edit the <Zowe install directory>/components/gateway/bin/start.sh, and modify the following properties:

• apiml.gateway.timeoutMillis

  This property defines the global value for http/ws client timeout.

Add the following properties to the file for the API Gateway:

Note: Ribbon configures the client that connects to the routed services.

• ribbon.connectTimeout

  Specifies the value in milliseconds which corresponds to the period in which API ML should establish a single, non-managed connection with the service. If omitted, the default value specified in the API ML Gateway service configuration is used.

• ribbon.readTimeout

  Specifies the time in milliseconds of inactivity between two packets in response from this service to API ML. If omitted, the default value specified in the API ML Gateway service configuration is used.

• ribbon.connectionManagerTimeout

  The HttpClient employs a special entity to manage access to HTTP connections called by the HTTP connection manager. The purpose of an HTTP connection manager is to serve as a factory for new HTTP connections, to manage the life cycle of persistent connections, and to synchronize access to persistent connections. Internally, the connections that are managed serve as proxies for real connections. ConnectionManagerTimeout specifies a period during which managed connections with API ML should be established. The value is in milliseconds. If omitted, the default value specified in the API ML Gateway service configuration is used.

CORS handling

You can enable the Gateway to terminate CORS requests for itself and also for routed services. By default, Cross-Origin Resource Sharing (CORS) handling is disabled for Gateway routes gateway/api/v1/** and for individual services. After enabling the feature as stated in the prodecure below, API Gateway endpoints start handling CORS requests and individual services can control whether they want the Gateway to handle CORS for them through the Custom Metadata parameters.

When the Gateway handles CORS on behalf of the service, it sanitizes defined headers from the communication (upstream and downstream). Access-Control-Request-Method,Access-Control-Request-Headers,Access-Control-Allow-Origin,Access-Control-Allow-Methods,Access-Control-Allow-Headers,Access-Control-Allow-Credentials,Origin The resulting request to the service is not a CORS request and the service does not need to do anything extra. The list can be overridden by specifying different comma-separated list in the property components.gateway.apiml.service.ignoredHeadersWhenCorsEnabled in zowe.yaml

Additionally, the Gateway handles the preflight requests on behalf of the service when CORS is enabled in Custom Metadata, replying with CORS headers:

• Access-Control-Allow-Methods: GET,HEAD,POST,DELETE,PUT,OPTIONS
• Access-Control-Allow-Headers: origin, x-requested-with
• Access-Control-Allow-Credentials: true
• Access-Control-Allow-Origin: *

Alternatively, list the origins as configured by the service, associated with the value customMetadata.apiml.corsAllowedOrigins in Custom Metadata.

If CORS is enabled for Gateway routes but not in Custom Metadata, the Gateway does not set any of the previously listed CORS headers. As such, the Gateway rejects any CORS requests with an origin header for the Gateway routes.

Use the following procedure to enable CORS handling.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.service.corsEnabled and set the value to true.
3. Restart Zowe&trade.

Requests through the Gateway now contain a CORS header.

Encoded slashes

By default, the API Mediation Layer accepts encoded slashes in the URL path of the request. If you are onboarding applications which expose endpoints that expect encoded slashes, it is necessary to keep the default configuration. We recommend that you change the property to false if you do not expect the applications to use the encoded slashes.

Use the following procedure to reject encoded slashes.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.service.allowEncodedSlashes and set the value to false.
3. Restart Zowe&trade.

Requests with encoded slashes are now rejected by the API Mediation Layer.

Add a custom HTTP Auth header to store Zowe JWT token

If a southbound service needs to consume the Zowe JWT token from a HTTP request header to participate in the Zowe SSO, you can define a custom HTTP header name as part of the Gateway configuration. The southbound service must use the zoweJwt scheme in order to leverage this functionality. Once the HTTP header name is defined, each request to the southbound service contains the JWT token in the custom header.

Use the following procedure to add the custom HTTP header.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.security.auth.jwt.customAuthHeader and set the value which represents the header's name.
3. Restart Zowe&trade.

Requests through the Gateway towards the southbound service now contain the custom HTTP header with the JWT token.

Add custom HTTP Auth headers to store user ID and PassTicket

If a southbound service needs to consume the passticket and the user ID from custom headers to participate in the Zowe SSO, you can define the custom HTTP headers names as part of the Gateway configuration. The southbound service must use the httpBasicPassTicket scheme in order to leverage this functionality. Once the HTTP headers names are defined, each request to the southbound service contains the passticket and the user ID in the custom headers.

Use the following procedure to add the custom HTTP headers.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.security.auth.passticket.customAuthHeader and set the value which represents the header's name.
3. Find or add the property components.gateway.apiml.security.auth.passticket.customUserHeader and set the value which represents the header's name.
4. Restart Zowe&trade.

Requests through the Gateway towards the southbound service now contain the custom HTTP headers with the passticket and the user ID.

Connection limits

By default, the API Gateway accepts up to 100 concurrent connections per route, and 1000 total concurrent connections. Any further concurrent requests are queued until the completion of an existing request. The API Gateway is built on top of Apache HTTP components that require these two connection limits for concurrent requests. For more information, see Apache documentation.

Use the following procedure to change the number of concurrent connections.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.server.maxConnectionsPerRoute and set the value to an appropriate positive integer.
3. Find or add the property components.gateway.server.maxTotalConnections and set the value to an appropriate positive integer.

Routed instance header

The API Gateway can output a special header that contains the value of the instance ID of the API service that the request has been routed to. This is useful for understanding which service instance is being called.

The header name is X-InstanceId, and the sample value is discoverable-client:discoverableclient:10012. This is identical to instanceId property in the registration of the Discovery service.

Use the following procedure to output a special header that contains the value of the instance ID of the API service.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property with value components.gateway.apiml.routing.instanceIdHeader:true.
3. Restart Zowe.

Distributed load balancer cache

You can choose to distribute the load balancer cache between instances of the API Gateway. To distribute the load balancer cache, it is necessary that the caching service is running. Gateway service instances are reuqired to have the same DN (Distinguished name) on the server certificate.

Use the following procedure to distribute the load balancer cache between instances of the API Gateway.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property with value components.gateway.apiml.loadBalancer.distribute: true.
3. Restart Zowe.

Replace or remove the Catalog with another service

By default, the API Mediation Layer contains API Catalog as a service showing available services. As the API Mediation Layer can be successfully run without this component it is possible to replace or remove the service from the Gateway home page and health checks. The following section describes the behavior of the Gateway home page and health checks.

The default option displays the API Catalog.

A value can also be applied to components.gateway.apiml.catalog.serviceId.

Examples:

• none

  Nothing is displayed on the Gateway home page and the Catalog is removed from /application/health

• alternative-catalog

  An alternative to the API Catalog is displayed

• metrics-dashboard

  A possible dashboard that could appear in place of the API Catalog

Notes:

• If the application contains the homePageUrl and statusPageRelativeUrl, then the full set of information is displayed.
• If the application contains the homePageUrl the link is displayed without the UP information.
• If the application contains the statusPageRelativeUrl then UP or DOWN is displayed based on the statusPage without the link.

Use the following procedure to change or replace the Catalog service.

Follow these steps:

1. Open the file zowe.yaml.

2. Find or add the property components.gateway.apiml.catalog.serviceId. Set the value with the following options:

   • Set the value to none to remove the Catalog service.
   • Set the value to the ID of the service that is onboarded to the API Mediation Layer.

Personal Access Token

By default the API Mediation Layer does not provide the ability to use personal access tokens. For more information about about this functionality, see Personal Access Tokens.

Use the following procedure to enable personal access tokens.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property with the value components.gateway.apiml.security.personalAccessToken.enabled: true.
3. Restart Zowe.

API Mediation Layer as a standalone component

You can start the API Mediation Layer independently of other Zowe components. By default, the Gateway, Zowe System Services, and Virtual Desktop start when Zowe runs. To limit consumed resources when the Virtual Desktop or Zowe System Services are not required, it is possible to specify which components start in the context of Zowe. No change is required during the installation process to support this setup.

Once Zowe is installed, use the following procedure to limit which components start.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.*.enabled and set this property to false for all components that should not be started.
3. Restart Zowe&trade.

SAF Resource Checking

The API ML can check for the authorization of the user on certain endpoints. Access to a SAF resource is checked with ESM.

Verification of the SAF resource is provided by the following three providers:

• endpoint

  This is the highest priority provider, such as a REST endpoint call (ZSS or similar one). This option is disabled by default. In Zowe, ZSS has the API to check for SAF resource authorization.

• native

  The Native JZOS classes from Java are used to determine SAF resource access. This is the default provider.

• dummy

  This is the lowest priority provider. This is the dummy implementation and is defined in a file.

Note: Verification of the SAF resource uses the first available provider based on the specified priority. The default configuration resolves to the native provider.

You can select a specific provider by specifying the components.gateway.apiml.security.authorization.provider key in the zowe.yaml file. Use the parameter value to strictly define a provider. If verification is disabled, select the endpoint option.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.security.authorization.provider and set desired value.
3. Restart Zowe&trade.

Examples:

components.gateway.apiml.security.authorization.endpoint.url: endpoint

Note: To configure the endpoint provider, add the following additional property: components.gateway.apiml.security.authorization.endpoint.enabled: true

components.gateway.apiml.security.authorization.provider: native

components.gateway.apiml.security.authorization.provider: dummy

To use the endpoint provider, customize the URL corresponding to the SAF resource authorization. By default, the ZSS API is configured and used.

Follow these steps:

1. Open the file zowe.yaml.
2. Find or add the property components.gateway.apiml.security.authorization.endpoint.url and set desired value. The default value for ZSS API is https://${ZWE_haInstance_hostname}:${GATEWAY_PORT}/zss/api/v1/saf-auth
3. Restart Zowe&trade.

Checking providers

REST endpoint call

The REST provider calls the external API to retrieve information about access rights. To enable the feature outside of the mainframe, such as when running in Docker, you can use a REST endpoint call using the GET method:

• Method: GET
• URL: {base path}/{userId}/{class}/{entity}/{level}
• Response:

    {
        "authorized": "{true|false}",
        "error": "{true|false}",
        "message": "{message}"
    }

Note: For more information about this REST endpoint call, see ZSS implementation.

Native

The Native provider is the easiest approach to use the SAF resource checking feature on the mainframe.

Enable this provider when classes com.ibm.os390.security.PlatformAccessControl and com.ibm.os390.security.PlatformReturned are available on the classpath. This approach uses the following method described in the IBM documentation: method.

Note: Ensure that the version of Java on your system has the same version of classes and method signatures.

Dummy implementation

The Dummy provider is for testing purpose outside of the mainframe.

Create the file saf.yml and locate it in the folder, where is application running or create file mock-saf.yml in the test module (root folder). The highest priority is to read the file outside of the JAR. A file (inner or outside) has to exist.

The following YAML presents the structure of the file:

  safAccess:
    {CLASS}:
      {RESOURCE}:
        - {UserID}

Notes:

• Classes and resources are mapped into a map, user IDs into a list.
• The load method does not support formatting with dots, such as shown in the following example: Example: {CLASS}.{RESOURCE} Ensure that each element is separated.
• The field safAccess is not required to define an empty file without a definition.
• Classes and resources cannot be defined without the user ID list.
• When a user has multiple definitions of the same class and resource, only the most privileged access level loads.