Sample Use Cases

The following use cases demonstrate the various functionalities available in Zowe Explorer.

Working with Data Sets

Viewing data sets and using multiple filters

1. Expand DATA SETS in the Side Bar, and hover over the profile you want to filter.

2. Click the Search icon.

3. Use the picker field to select or enter the patterns you want to apply as filters.

   The data sets that match your pattern(s) display in the Side Bar.

   Tip: To use multiple filters, separate individual entries with a comma. You can append or postpend any filter with an * to indicate a wildcard search. You cannot enter an * as the entire pattern.

   

Viewing data sets with member filters

1. Expand DATA SETS in the Side Bar, and hover over the profile you want to filter.

2. Click the Search icon.

3. In the picker field, enter or select a search pattern in the HLQ.ZZZ.SSS(MEMBERNAME) format to filter out and display the specified member in the Side Bar.

   

Refreshing the list of data sets

1. Hover over DATA SETS in the Side Bar.
2. Click the Refresh All icon.

Renaming data sets

1. Expand DATA SETS in the Side Bar, and select the data set you want to rename.

2. Right-click the data set and select the Rename Data Set option.

3. Enter the new name of the data set in the picker field.

   

Copying data set members

1. Expand DATA SETS in the Side Bar, and select the member you want to copy.

2. Right-click the member and select the Copy Member option.

3. Right-click the data set where the member is to be contained and select the Paste Member option.

4. In the picker field, enter the name of the copied member.

   

Editing and uploading a data set member

1. Expand DATA SETS in the Side Bar, and select a profile to open it.

2. Open the data set with the member you want to edit.

3. Click on the member name to display it in an Editor tab.

4. Edit the document.

5. Press Ctrl+S or Command+S to save the changes and upload the data set to the mainframe.

   Note: If someone else has made changes to the data set member while you were editing, you can merge your changes before uploading to the mainframe. See Preventing merge conflicts for more information.

   

Preventing merge conflicts

1. Expand DATA SETS in the Side Bar, and navigate to the member you want to edit.

2. Edit the document in the Editor tab.

3. Press Ctrl+S or Command+S to save the changes.

   If the original content in your local version no longer matches the same file in the mainframe, a warning message displays advising the user to compare both versions.

4. If necessary, use the editor tool bar to resolve merge conflicts.

   

Creating data sets and specifying parameters

1. Expand DATA SETS in the Side Bar.

2. Right-click the profile you want to create a data set with and select Create New Data Set.

3. Enter a name for your data set in the picker field and press Enter.

4. From the picker drop-down menu, select the data set type that you want to create and press Enter.

5. Select Edit Attributes in the picker drop-down menu and press Enter.

   The attributes list for the data set displays. You can edit the following attributes:

   • Allocation Unit

   • Average Block Length

   • Block Size

   • Data Class

   • Device Type

   • Directory Block

   • Data Set Type

   • Management Class

   • Data Set Name

   • Data Set Organization

   • Primary Space

   • Record Format

   • Record Length

   • Secondary Space

   • Size

   • Storage Class

   • Volume Serial

6. Select the attribute you want to edit, provide the value in the picker field, and press Enter.

7. (Optional) Edit the parameters of your data set.

8. Select the + Allocate Data Set option to create the data set and list it in the Side Bar.

   

Creating data sets and data set members

1. Expand DATA SETS in the Side Bar.

2. Right-click on the profile where you want to create a data set and select Create New Data Set.

3. Enter a name for your data set in the picker field and press Enter.

4. From the picker drop-down menu, select the data set type that you want to create.

5. Select +Allocate Data Set to create your data set.

6. In the Side Bar, right-click your newly-created data set and select Create New Member.

7. Enter a name for your new data set member in the picker field and press Enter. The member is created and opened in an Editor tab.

Deleting a data set member and a data set

1. Expand DATA SETS in the Side Bar.

2. Open the profile and data set containing the member you want to delete.

3. Right-click the member and select Delete Member.

4. Confirm the deletion by selecting Delete on the picker drop-down menu.

5. To delete a data set, right-click the data set and select Delete Data Set, then confirm the deletion.

   Note: You can delete a data set before you delete its members.

   

Viewing data set, member attributes

1. Expand DATA SETS in the Side Bar, and click the + icon.

2. Select the Search icon.

3. In the picker field, enter or select a search pattern to filter search results in the Side Bar.

4. Right-click a data set or member and select the Show Attributes option.

   This displays the attributes in an Editor tab.

   

Viewing and accessing multiple profiles simultaneously

1. Expand DATA SETS in the Side Bar, and click the + icon.

2. Select the profiles from the picker drop-down to add them to the Side Bar.

3. Click the Search icon for each profile to search and select associated data sets.

   

Submiting a JCL

1. Expand DATA SETS in the Side Bar.

2. Select the data set or data set member you want to submit.

3. Right-click the data set or member and select the Submit Job option.

   Note: Click on the hyperlink on the notification pop-up message to view the job.

   

Allocate like

1. Expand DATA SETS in the Side Bar.

2. Right-click a data set and select the Allocate Like (New File with Same Attributes) option.

3. Enter the new data set name in the picker field and press Enter.

   

Working with USS files

Viewing Unix System Services (USS) files

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Hover over the profile you want to search and click the Search icon.

3. In the picker field, enter or select the path that you want as the root of your displayed tree and press Enter.

   All child files and directories of that path display in the Side Bar.

   Note: You will not be able to expand directories or files to which you are not authorized.

   

Refreshing the list of files

1. Hover over UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Click the Refresh All button.

   

Renaming USS files

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Select a USS file you want to rename.

3. Right-click the USS file and select the Rename USS file option.

4. In the picker field, change the name of the USS file and press Enter.

Downloading, editing, and uploading existing USS files

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Navigate to the file you want to download and click on the file name.

   This displays the file in an Editor tab.

   Note: If you define file associations with syntax coloring, the suffix of your file will be marked up.

3. Edit the document.

4. Press Ctrl+S or Command+S to save the changes and upload the USS file to the mainframe.

   

Creating and deleting USS files and directories

Creating a directory

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Right-click the directory where you want to add the new directory.

3. Select the Create Directory option and enter the directory name in the picker field.

4. Press Enter to create the directory.

Creating a file

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Right-click the directory to which you want to add the new file.

3. Select the Create File option and enter the file name in the picker field.

4. Press Enter to create the file.

Deleting a file

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Right-click the file you want to remove.

3. Select the Delete option and click Delete again to confirm and delete the file.

Deleting a directory

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar.

2. Right-click the directory you want to remove.

3. Select the Delete button and click Delete again to confirm and delete the directory and all its child files and directories.

   

Viewing and accessing multiple USS profiles simultaneously

1. Expand UNIX SYSTEM SERVICES (USS) in the Side Bar, and click the + icon.

2. Select or enter a profile in the picker drop-down menu to add it to the Side Bar.

   

Working with jobs

Viewing a job

1. Expand JOBS in the Side Bar.

2. Open a directory with JCL files.

3. Right-click on the JCL file you want to view, and select the Get JCL option.

   

Downloading spool content

1. Expand JOBS in the Side Bar.

2. Open a directory with JCL files.

3. Click the Download icon next to a folder with the spool content.

4. Save the file on your computer.

   

Issuing MVS commands

1. Expand JOBS in the Side Bar.

2. Right-click on your profile and select the Issue MVS Command option.

   Alternatively, press the F1 key to open the Command Pallette, then select the Zowe Expolorer: Issue MVS Command option.

3. In the picker field, enter a new command or select a saved command.

4. Press Enter to execute the command.

   

Issuing TSO commands

1. Expand JOBS in the Side Bar.

2. Right-click on your profile and select the Issue TSO Command option.

   Alternatively, press the F1 key to open the Command Pallette, then select the Zowe Explorer: Issue TSO Command option.

3. In the picker field, enter a new command or select a saved command.

4. Press Enter to execute the command.

   The output displays in the Output panel.

   

Polling a spool file

Users can periodically refresh a spool file during long-running jobs to get the latest job outputs. This avoids having to close and reopen a spool file to get the latest job outputs.

There are two main ways to poll a spool file — automatically at set intervals or manually on demand.

Defining a default interval for polling spool files

1. Click on the Settings icon on the Activity Bar and select Settings.
2. In either the User or Workspace tab, click on the Extensions option to open the menu.
3. Select Zowe Explorer.
4. In the Jobs: Poll Interval field, enter a valid time interval, in milliseconds.
   • Value must be greater than or equal to 1000 ms (1 second).

Polling a spool file at set intervals

1. Expand JOBS in the Side Bar.

2. Navigate to the spool file by expanding its corresponding profile and job folder.

3. Right click the spool file and select Start Polling.

   • Repeat this step with additional spool files to poll multiple files simultaneously.

4. The Poll interval (in ms) for: <spoolfilename> field displays the current interval value.

   • The default value is set to 5000 ms.
   • Change the value by entering a different number (must be greater than or equal to 1000 ms).

5. Press Enter to confirm the interval time and start the polling action.

   The poll request is added to the poller, and the selected spool file is marked with a "P" in the Side Bar and any corresponding Editor tabs.

   

Stopping spool file polling

1. In the Side Bar, select a spool file that is being polled.

2. Right click the spool file and select Stop Polling.

   The poll request is removed from the poller, and the selected spool file is no longer marked with a "P" in the Side Bar and any corresponding Editor tabs.

Polling a spool file manually

A spool file can be polled on demand by using a designated keyboard shortcut.

To manually poll a spool file:

1. In the Side Bar, double click a spool file to open it in an Editor tab.

2. With the spool file in an active tab, press the keyboard shortcut.

   • See Configuring the keyboard shortcut for manual polling to set the keyboard shortcut.
   
   

   The spool file is updated and "Polling..." displays in the bottom status bar.

Configuring the keyboard shortcut for manual polling

1. Click on the Settings icon on the Activity Bar and select Keyboard Shortcuts.

2. Navigate to Zowe Explorer: Poll Content in Active Editor.

3. Select the Edit icon to designate a different keyboard shortcut.

   • The default shortcut is the F5 key.
     

   The entered key(s) can be used to activate polling.

Cancelling a job

1. In the **Side Bar**, click on a job session to view its respective jobs.

2. Click on one or more jobs to select.

3. Right-click on the selected job(s) and click Cancel Job in the pop-up menu.

   The selected jobs are cancelled and are labelled "CANCELED" in the Side Bar.

   If cancellation fails, a message displays to notify which jobs have failed to be cancelled. The user can click on one of these jobs in the Side Bar to view its spool files and check for any outputs that might have occurred during the cancellation attempt.